!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Please Visit DIY Tool Supply for all your Tool Needs

24 April 2007

How to Build a Coat Closet - Framing the Door



The first step in framing the door is attaching the door frame to the studs already in place. Cut (2) 2"x4"s to the length of the door rough-in height. Nail these to the side studs that were already in place. The distance between this rough door frame should equal the rough-in width of the pre-hung door. Next, nail the header plate to these framing studs. Cut 2"x4"s to fit between the header plate and the top header. These are called cripple studs. Toenail three of them between the header plate and door header plate, one on each side, and one in the middle.
Below you can see where I am framing out the new coat closet. I have the door frames in but have not yet put in the cripple studs. This is a test fit of the door to make sure the rough in dimensions were correct.

2 comments:

Anonymous said...

Good Job! :)

Unknown said...

I really enjoyed reading this blog, i must to say that i liked very much all the good new ideas introduced here. Simply catched my attention. I usually like to know about everything and i am fan of the good blogs.That is why i prefered to read this one. excelent.
_________________________________
buy viagra, the result is amazing!!!